Open a new web page and navigate to www.emberpulse.com.au

Screen Image	Action Required
	Select Log in to continue
	Enter in your Emberpulse account username or associated email address Enter in your Emberpulse account password Select Log in to continue
	Click [Connected Devices] tab
	Click [Add Device]
	Click [Embermeter]
	Click [Add], a three minute count-down will begin. The following steps must be conducted whilst in count-down mode.
	If the light is already magenta (as per picture shown), Press the 'A' button on the Embermeter once and the light should turn cyan (blue) which indicates successful re-connection.
	If the light is yellow, long-press the 'A' button for 20 second then let go, the light should now be magenta. Press the 'A' button on the Embermeter once and the light should turn cyan (blue) which indicates successful re-connection.
	The Embermeter has successfully re-connected to your Emberpulse unit.